Skip to content

Real-Time Operating System (RTOS) for Xilinx Zynq-7000 Cortex-A9 (ARMv7-A) multi-core SoCs (ZedBoard, PicoZed, MicroZed and similars) based on the ARINC 653 Part 1 specification

License

Notifications You must be signed in to change notification settings

lfarcaro/ARINC653_ARMV7A_Z7000

Repository files navigation

ARINC653_ARMV7A_Z7000

Bare-metal Real-Time Operating System (RTOS) for Xilinx Zynq-7000 Cortex-A9 (ARMv7-A) multi-core SoCs (ZedBoard, PicoZed, MicroZed and similars) based on the ARINC 653 Part 1 specification

IDE installation:

  • Run Xilinx Unified Installer v2018.3 (or a similar superior version)
  • Select "Vivado HL WebPACK" installation
  • Ensure "Vivado Design Suite", "Software Development Kit (SDK)" (with the ARM Cortex-A9 Compiler Tool Chain) and "SoCs/Zynq-7000" are marked

Compilation configuration:

  • C/C++ Build / Settings / ARM v7 gcc compiler / Directories / Include Paths += "${workspace_loc:/${ProjName}/src/ARINC653_PORT/include}" (add to both "Debug" and "Release")
  • C/C++ Build / Settings / ARM v7 gcc compiler / Directories / Include Paths += "${workspace_loc:/${ProjName}/src/ARINC653/include}" (add to both "Debug" and "Release")
  • C/C++ Build / Settings / ARM v7 gcc compiler / Directories / Include Paths += "${workspace_loc:/${ProjName}/src/Test/include}" (add to both "Debug" and "Release")
  • C/C++ Build / Settings / ARM v7 gcc linker / Linker Script = "../src/Application/ARMV7A_Z7000.ld" (change for both "Debug" and "Release")

MicroPhase Z7-Lite JTAG debugging configuration:

  • J1 = 1-2 [JTAG]

Debugging on the target platform:

  • Select "Run" -> "Debug Configurations..."
  • Double-click "Xilinx C/C++ application (System Debugger)"
  • Configure the debug configuration as follows:
    • Target Setup / Debug Type = Standalone Application Debug
    • Target Setup / Connection = Local
    • Target Setup / Reset entire system = TRUE
    • Target Setup / Program FPGA = TRUE
    • Target Setup / Run ps7_init = TRUE
    • Target Setup / Run ps7_post_config = TRUE
    • Application / Stop at 'main' = FALSE
    • Application / Processor "ps7_cortexa9_0":
      • Summary / Download = TRUE
      • Stop at program entry = TRUE
    • Application / Processor "ps7_cortexa9_1":
      • Summary / Download = FALSE
      • Stop at program entry = FALSE
  • Click "Apply"
  • Click "Debug"

Debugging on the second core (after the debug session is started):

  • Select "Run" -> "Debug Configurations..."
  • Select debug configuration to be used
  • Configure the debug configuration as follows:
    • Symbol files / Debug context "/APU/ARM Cortex-A9 MPCore #1" ():
      • Click "Add..."
      • Select the project's ELF file
      • Click "OK"
    • Click "Close"

Programming the bitstream into the QSPI memory:

  • Build the project
  • Open the project in Vivado
  • Open "Hardware Manager" -> "Open Target" -> "Auto Connect"
  • In window "Hardware", right-click "xc7z010_1" and open "Add Configuration Memory Device..."
  • Set "Manufacturer" to "Winbond"
  • Set "Type" to "qspi"
  • Set "Width" to "x4-single"
  • Select the "w25q128fv-qspi-x4-single" part number
  • Click "OK"
  • Accept programming the device by clicking "OK"
  • Set "Configuration file" to the "BOOT.bin" file built
  • Set "Zynq FSBL" to the "fsbl/Debug/fsbl.elf" file found in the software project directory
  • Click "OK"

About

Real-Time Operating System (RTOS) for Xilinx Zynq-7000 Cortex-A9 (ARMv7-A) multi-core SoCs (ZedBoard, PicoZed, MicroZed and similars) based on the ARINC 653 Part 1 specification

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published