Skip to content

Event extraction library for Pupil Labs eye tracker data.

License

Notifications You must be signed in to change notification settings

gmierz/pupil-lib

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

v1.2.0: DOI Build Status

Pupil-Lib Python

This library is for processing data that is obtained from the Pupil Labs eye tracker working in conjunction with Lab Streaming Layer (LSL) that retrieves the needed event markers and eye tracker data. These event markers can be created anywhere and sent over the network to the Lab Recorder. The XDF file's created can then be given to this library, with a configuration file (a YAML or .yml file), to perform trial extraction. It can be used as a command line tool, or python module import.

Once processed by this library, the trials that are returned after extraction have zero error in their length relative to what was requested - leaving only small network latencies as the cause for errors. The data is also resampled into an evenly spaced timeseries to make processing and analysis simpler. This is particularly useful when we need to deal with un-evenly sampled data streams obtained from LSL's XDF data exports or the Pupil Labs eye tracker. These streams are also synchronized by LSL on import and have a high level of precision.

Another use of this library is the ability to convert Pupil Labs XDF files into CSV, or Matlab .mat files that can be processed anywhere. Data is also upsampled to 256Hz and corrected for irregular sampling rates. See this file for an example.

The Matlab version is available here: https://github.com/gmierz/pupil-lib-matlab

This python version of the library will only work on Python 3+.

Academic articles using this library

  1. R. Butler, G.W. Mierzwinski, P.M. Bernier, M. Descoteaux, G. Gilbert, K. Whittingstall, Neurophysiological basis of contrast dependent BOLD orientation tuning, NeuroImage, 2019, 116323, ISSN 1053-8119, https://doi.org/10.1016/j.neuroimage.2019.116323.

Recent Changes

The following changes are incorporated into the PyPi pupillib module at version 1.2.0.

  1. Pupil LSL Relay 2.0 support.
  2. Drastic increase in the number of time series that can be obtained. See this sample config.

The following changes are incorporated into the PyPi pupillib module at version 1.1.0.

  1. Matlab '.mat' output is now supported! Instead of save_csv, use save_mat to store '.mat' files.
  2. Merging multiple datasets is working as expected now.
  3. Simplified rejected trial exclusion/inclusion from data. At any level of the data_container objects, set datastore.exclude_rejects = False to include rejected trials in the data obtained from get_matrix calls. Setting this flag to False also changes what is saved with the save_csv and save_mat functions since they use get_matrix to gather data that needs to be saved.
  4. Raw trial data that is processed by some pre/post functions is no longer overwritten by the processed data. This data now exists in the proc data_type rather than the original data type.
  5. Added --save-mat and --prefix to the optional arguments that can be used from the command line interface.
  6. .data can now be used to access the processed data instead of .data_store. .data_store is still available but will be removed in a future release.
  7. Documentation was updated to reflect the changes.
  8. (Under-the-hood) Logging is now a bit simpler, and not as verbose as before. With this patch, preparations are being made to remove threaded options.

Dependencies

To have an experiment compatible with this library the following is required:

  1. Pupil Labs binocular eye tracker: https://pupil-labs.com/ .
  2. Lab Streaming Library (LSL): https://github.com/sccn/labstreaminglayer . The version contained in 'liblsl-1.04.zip' in the downloads page is known to work with the Matlab marker inlet function.
    1. To install, you will have to clone the repo locally.
    2. For Matlab scripts, download the code in LSL/liblsl-matlab and LSL/liblsl.
    3. Copy the files in liblsl into liblsl-matlab/bin, then add the matlab directory into the matlab path.
    4. Now you can use it in a stimulus script.
  3. LabRecorder: ftp://sccn.ucsd.edu/pub/software/LSL/Apps/ . This version contained in 'LabRecorder-1.12c.zip' is known to work with the Pupil Labs eye tracker and produces compatible XDF files.
  4. Install Pupil Labs LSL Plugin 2.0. Follow their instructions in the readme. It should be possible to install pylsl with pip install pylsl.
  5. (Optional - Pupil Labs LSL Plugin 2.0 now works from step 4, if there are issues with that one then try this older version). Pupil Labs LSL Plugin: https://github.com/labstreaminglayer/App-PupilLabs/releases/tag/v1.0 . Follow their instructions to get it working. I had to use the source code in the Lab Streaming Library repo to be able to properly produce the 'pylsl' folder. What helped the most here was running the script 'get_deps.py' which will fill the 'pylsl' folder with needed files. This can be done before or after the 'build' phase. Ignore the link at "LSL Python bindings on the first step, it's broken and should point here but it's not required.

Running a compatible experiment

Any experiment must use the Lab Recorder to record all the data, the Pupil Labs LSL Relay Plugin (mentioned above) to send data from a Capture interface running on a network, and a Lab Streaming Layer outlet producing event markers (from any language) somewhere. See here for a Matlab example - use with outlet.push_sample({'Marker Name'}) in a stimulus script. You can wait until it has consumers as well to automatically start stimuli from a Lab Recorder application.

Any experiment, in general, goes as follows:

  1. Insert markers into stimulus scripts, and have it ready and waiting for consumers.
  2. Start eye trackers, and Pupil Capture and prepare - ensure that the relay plugin is on.
  3. Open Lab Recorder on a recording machine that is on to the same network the eye trackers and event markers are on.
  4. Check boxes for all data required
    • diameter_3d (in mm) comes from the Python representation, and diameter is the diameter (in pixels) uncorrected for perspective it is the only diameter available in the Primitive data.
    • Always remember to have the marker one selected, or the stimulus won't start if you're waiting on consumers.
    • If you're not sure what you need, take the python representation. It will result in large files, but it's also the only way to get perspective corrected diameters (or specific gaze data).
  5. Start Lab Recorder when you're ready to start the experiment.

Note: There is no need to record from Pupil Capture, but you can if you still need to.

Usage

Once you clone this library, you should run python setup.py install from within the directory so that you can use it in a script anywhere. Here are some example commands:

cd ~
git clone https://github.com/gmierz/pupil-lib-python
cd pupil-lib-python
python setup.py install

You can also install this through pip now:

pip install pupillib

If any errors are encountered during installation, try using a virtual environment (these commands differ based on the OS - see here for more info):

pip install virtualenv

virtualenv pupillib-venv

pupillib-venv\Scripts\activate
pip install pupillib

After this, you will be able to use pupillib as a python module import or a command line tool with YAML configurations.

An easy way to get going after this is by using the script pupillib/simple_script.py as an example to get what you need. Then change yaml_path='resources/test_yaml1.yml' to point to another YAML file (which could be the same file - copied or not) and modify the configuration to your experiment.

The markers that are recorded must have a type of 'Markers' to be processed. If the type is mixed with the name change type to name here: One way is to use it is in a script with calls that resemble the main() function in pupil_lib.py. yaml_path must be defined in the get_build_config(yaml_path=<PATH/TO/YAML>) call. Or if you don't need much control, script_run(yaml_path=<PATH/TO/YAML>) in the same file can be used to do everything and return an PupilLibRunner object that contains the data in the field .data_store.

See docs/data_container.md for more information on the data container .data_store which holds all the data - pupillib/simple_script.py is a good example.

You can also use it through the command prompt as well with something like (this is the suggested method):

pupillib --run-config C:\Users\Gregory\PycharmProjects\pupil_lib_parallel_exp\resources\test_yaml1.yml`

Or with only this to get the arguments from a YAML configuration file (defined in the docs/ folder):

pupillib -D C:\Recordings\CurrentStudy\subj4\block__old41.xdf --data-names gaze_x gaze_y
 --trigger-pre-processing "{name: default}" {'name':'get_sums','config':[4]} -t S11 S12 --max-workers 1
 --tr -2 0 --logger stdout --test --testingdepth deep

Data Usage

data_container.py shows the general structure of the data once it's finished processing, with docs in docs/data_container.md. Generally speaking, accessing data will be similar in all cases to what is done in simple_script.py.

Marker creation

Using the Pupil Labs LSL plugin, you can create and send markers from a stimulus script in the same way that is done here.

The stream can/will be saved by the Lab Recorder software and that data can then be used for processing in this library. (For the stimulus scripts, they can be in any language that LSL offers so that markers can be created and sent).

Examples of data that can be retrieved

These images below are from processing a dataset where a subject was looking at these stimuli:

alt text

Gaze data (gaze_x, and gaze_y fields) - data from when a world camera was not in use:

alt text

All trials across all triggers:

alt text

Mean of all trials for each trigger overlaid:

alt text

Customization

This library, at it's core, only extracts trials. This is why it's main features are zero-error trial extraction, and helping with the correction of uneven sampling rates. But it uses processor files to perform any processing like percent-change calculations, and filtering. Because of this it is very simple to insert your own customized functionality before or after any part of the processing pipeline. See pupillib/docs/pre_post_functions for how to do this. In the near future, it will also be possible to add custom classes (extending from the processor classes) with the same decorators from a directory outside the library with an environment flag.

Testing

Testing is done within the library itself, but it is only fully tested when testing: True is set in the config entry of a YAML configuration file. This makes it simpler to reproduce specific errors within a given dataset. There are also two test YAML files situated in pupillib/resources.

Future Additions and Fixes

  1. Custom class imports for processing.
  2. Stronger/better CSV exporting.
  3. Deprecation of all command line arguments except for --run-config=<PATH> for simplification purposes.
  4. More documentation of data structures at the various pre/post processing levels.

Academic Citation

There is no article to cite for this source code for the time being. However, if this code is used in any scientific publications, please consider referencing this repository by following the Zenodo badge link, and using the "cite as" entry from there:

DOI

If you need a newer release, you can let me know through an issue.

License - GPLV3

This library is licensed under GPLV3, see here for the license: https://github.com/gmierz/pupil-lib/blob/master/LICENSE If another type is required please contact me so that we can discuss.

Finally, as always feel free to ask any questions you may have through issues and post your issues or suggested improvements through there as well. :)