Skip to content
/ the100 Public

THE 100 - The worlds fastest 3D Printer based on a printed frame

License

Notifications You must be signed in to change notification settings

MSzturc/the100

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

40 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

THE 100, the fastest 3D Printer based on a printed frame.

  • It does Speedboat in less than 6 minutes and is capable of doing high quality prints in 1/10th of the time a Ender 3 would need.
  • By the time releasing, The 100 is at the 26th rank of the leaderboard of the fastest printers in the world and it's the fastest one that uses a 3d printed frame.
  • And the best thing, this printer 100% open source. Which means if you like this printer and you like to build one by own, you find all resources needed to do this in this repository

Links

Print Settings

To print the STL files, a 3D printer with a print bed of at least 230x230mm is required. I've printed all parts out of PLA. If you plan to print ABS/ASA on the printer i would suggest to print the print bed out of a more temprature resistant material.

For all STL Parts exept the print bed i've used the following settings:

  • 0.25 Layer height
  • 0.5 Line width
  • 3 Top layers
  • 3 Bottom layers
  • 3 Walls
  • 25% Infill
  • Grid Infill Pattern

For the print bed:

  • 30% Infill

The infill of the print bed needs to be slightly higher to move the center of gravity to where the lead screws are attached. This is needed to stop binding on the Z-Axis.

Specifications

  • Printing Technology: FDM
  • Build Volume: 165x165x150mm
  • Maximum Printing Speed: 400mm/s
  • Maximum Acceleration: 100.000mm/s²
  • Layer Height: 0.1-0.35mm
  • Extruder: BMG Bowden Extruder
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4 (swappable)
  • Maximum Nozzle Temperature: 300°C
  • Maximum Heatbed Temperature: 110°C
  • Leveling Mode: manual
  • File Transfer: USB Drive, WIFI
  • Rated Power: 350W
  • Supported Filaments: PLA, PETG

Builds by the Community

img

Releases

No releases published

Packages

No packages published