Skip to content

Latest commit

 

History

History
795 lines (544 loc) · 23.9 KB

Changelog.rst

File metadata and controls

795 lines (544 loc) · 23.9 KB

Change Log

2.12.0

Changes

  • Added alias optional parameter to SSHClient and HostConfig for passing through from parallel clients. Used to set an SSH host name alias, for cases where the real host name is the same and there is a need to differentiate output from otherwise identical host names - #355. Thank you @simonfelding.
  • Parallel clients now read a common private key only once, reusing it for all clients it applies to, to improve performance.
  • Performance improvements for all clients when reading output.
  • Output reading for all clients has been changed to be less prone to race conditions.

Fixes

  • Calling ParallelSSHClient.join without ever running run_command would raise exception. Is now a no-op.

2.11.1

Changes

  • Updated default log formatter set by pssh.utils enable logger functions.

Fixes

  • Using native clients under pssh.clients.native with very short lived commands would sometimes cause unexpected stalls/delays in reading output from completed commands when a client timeout setting was used - #344.

2.11.0

Changes

  • Updated minimum required versions for ssh2-python and ssh-python.

2.10.0

Changes

  • All client configuration can now be provided via HostConfig on parallel clients.
  • proxy_pkey can now also be provided as bytes for proxy authentication from in-memory private key data - #338
  • Removed deprecated since 2.0.0 dictionary support for host_config entries.

2.9.1

Fixes

  • Even more rare race condition would sometimes cause scp_send to write incomplete files - #337

2.9.0

Changes

  • pssh.exceptions.ConnectionError is now the same as built-in ConnectionError and deprecated - to be removed.
  • Clients now attempt to connect with all addresses in DNS list. In the case where an address refuses connection, other available addresses are attempted without delay. For example where a host resolves to both IPv4 and v6 addresses while only one address is accepting connections, or multiple v4/v6 addresses where only some are accepting connections.
  • Connection actively refused error is no longer subject to retries.

Fixes

  • scp_send in native clients would sometimes fail to send all data in a race condition with client going out of scope.

2.8.0

Changes

  • All clients now support private key data as bytes in pkey parameter for authentication from in-memory private key data - #317. See documentation for examples.
  • Parallel clients now read a provided private key path only once and use in-memory data for authentication to avoid reading same file multiple times, if a path is provided.

2.7.1

Fixes

  • copy_file performance would be abnormally low when copying plain text files - 100x performance increase. Binary file copying performance has also increased.

2.7.0

Changes

  • All clients now support IPv6 addresses for both DNS and IP entries in host list.
  • Added ipv6_only flag to ParallelSSHClient and SSHClient for choosing only IPv6 addresses when both v4 and v6 are available.
  • Removed Python 2 from binary wheel compatibility as it is no longer supported and not guaranteed to work.
  • Host name is now an argument for all exceptions raised by single clients.

Fixes

  • HostOutput would have empty host on some exceptions when stop_on_errors is False - #297
  • Race condition when forcefully closing channel via SSHClient.close_channel while channel data was left unread.

2.6.0

Changes

  • user keyword argument no longer required on Windows - exception is raised if user cannot be identified.
  • Removed deprecated since 2.0.0 functions and parameters.

Fixes

  • copy_remote_file with recurse enabled would not use a provided encoding for sub-directories - #284
  • Reconnecting to the same proxy host when proxy is configured would sometimes cause segfauls - ##304

2.5.4

Fixes

  • Password authentication via pssh.clients.ssh would not work - #276

2.5.3

Fixes

  • Sending files via scp_send or sftp_put with timeout set could timeout unexpectedly on opening remote file - #271.

2.5.2

Fixes

  • Agent authentication would not work for the libssh clients under pssh.clients.ssh - #267.
  • Password authentication would be attempted if all other methods failed even when no password was provided.
  • Gevent minimum version was too low - #269.

2.5.1

Fixes

  • Successful identity file authentication would raise error - #264.

2.5.0

Changes

  • Python 2 no longer supported.
  • Updated class arguments, refactor for pssh.clients.native.tunnel.

Fixes

  • Closed clients with proxy host enabled would not shutdown their proxy servers.
  • Clients with proxy host enabled would not disconnect the proxy client on .disconnect being called.
  • Default identity files would not be used when private key was not specified - #222.
  • ParallelSSHClient(<..>, identity_auth=False would not be honoured.

2.4.0

Changes

  • Added interactive shell support to single and parallel clients - see documentation.
  • Added pssh.utils.enable_debug_logger function.
  • ParallelSSHClient timeout parameter is now also applied to starting remote commands via run_command.
  • HostOutput.stdin now handles EAGAIN automatically when writing - #165.
  • Assigning to ParallelSSHClient.hosts cleans up clients of hosts no longer in host list - #220.

Fixes

  • SSHClient with proxy enabled could not be used without setting port - #248
  • Encoding would not be applied to command string on run_command and interactive shells, utf-8 used instead - #174.

2.3.2

Fixes

  • Client output implementation Python 2 support.

2.3.1

Changes

  • SSHClient.read_output and read_stderr now take buffer to read from as argument instead of channel.
  • SSHClient.wait_finished now takes HostOutput argument instead of channel.

Fixes

  • Output for multiple commands on one host run at the same time would be lost.

2.3.0

Changes

  • SSHClient now starts buffering output from remote host, both standard output and standard error, when a command is run.
  • SSHClient.read_output, SSHClient.read_stderr and iterating on stdout/stderr from HostOutput now read from the internal buffer rather than the SSH channel directly.
  • ParallelSSHClient.join no longer requires consume_output to be set in order to get exit codes without first reading output.
  • ParallelSSHClient.join with timeout no longer consumes output by default. It is now possible to use join with a timeout and capture output after join completes.
  • ParallelSSHClient.reset_output_generators is now a no-op and no longer required to be called after timeouts.
  • HostOutput.stdout and stderr are now dynamic properties.
  • Added HostOutput.read_timeout attribute. Can be used to see what read timeout was when run_command was called and to change timeout when next reading from HostOutput.stdout and stderr.
  • Added HostOutput.encoding attribute for encoding used when run_command was called. Encoding can now be changed for when next reading output.
  • ParallelSSHClient.join with timeout no longer affects stdout or stderr read timeout set when run_command was called.
  • LibSSH clients under pssh.clients.ssh now allow output to be read as it becomes available without waiting for remote command to finish first.
  • Reading from output behaviour is now consistent across all client types - parallel and single clients under both pssh.clients.native and pssh.clients.ssh.
  • ParallelSSHClient.join can now be called without arguments and defaults to last ran commands.
  • ParallelSSHClient.finished can now be called without arguments and defaults to last ran commands.

This is now possible:

output = client.run_command(<..>)
client.join(output)
assert output[0].exit_code is not None

As is this:

client.run_command(<..>, read_timeout=1)
client.join(output, timeout=1)
for line in output[0].stdout:
    print(line)

Output can be read after and has separate timeout from join.

See documentation for more examples on use of timeouts.

2.2.0

Changes

  • New single host tunneling, SSH proxy, implementation for increased performance.
  • Native SSHClient now accepts proxy_host, proxy_port and associated parameters - see API documentation.
  • Proxy configuration can now be provided via HostConfig.
  • Added ParallelSSHClient.connect_auth function for connecting and authenticating to hosts in parallel.

2.1.0

Changes

  • Added certificate authentication support for the pssh.clients.ssh clients.

2.0.0

Changes

See Upgrading to API 2.0 for examples of code that will need updating.

  • Removed paramiko clients and dependency.
  • ParallelSSHClient.run_command now always returns a list of HostOutput - return_list argument is a no-op and may be removed.
  • ParallelSSHClient.get_last_output now always returns a list of HostOutput.
  • SSHClient.run_command now returns HostOutput.
  • Removed deprecated since 1.0.0 HostOutput dictionary attributes.
  • Removed deprecated since 1.0.0 imports and modules.
  • Removed paramiko based load_private_key and read_openssh_config functions from pssh.utils.
  • Removed paramiko based pssh.tunnel.
  • Removed paramiko based pssh.agent.
  • Removed deprecated ParallelSSHClient.get_output function.
  • Removed deprecated ParallelSSHClient.get_exit_code and get_exit_codes functions.
  • Removed deprecated ParallelSSHClient host_config dictionary implementation - now list of HostConfig.
  • Removed HostOutput.cmd attribute.
  • Removed ParallelSSHClient.host_clients attribute.
  • Made ParallelSSHClient(timeout=<seconds>) a global timeout setting for all operations.
  • Removed run_command(greenlet_timeout=<..>) argument - now uses global timeout setting.
  • Renamed run_command timeout to read_timeout=<seconds>) for setting output read timeout individually - defaults to global timeout setting.
  • Removed pssh.native package and native code.
  • ParallelSSHClient.scp_send now supports copy_args keyword argument for providing per-host file name arguments like rest of scp_* and copy_* functionality.
  • Changed exception names to end in Error from Exception - backwards compatible.
  • UnknownHostException, AuthenticationException, ConnectionErrorException, SSHException no longer available as imports from pssh - use from pssh.exceptions.

Fixes

  • Removed now unnecessary locking around SSHClient initialisation so it can be parallelised - #219.
  • ParallelSSHClient.join with encoding would not pass on encoding when reading from output buffers - #214.
  • Clients could raise Timeout early when timeout settings were used with many hosts.

Packaging

  • Package architecture has changed to none-any.

1.13.0

Changes

  • Added pssh.config.HostConfig for providing per-host configuration. Replaces dictionary host_config which is now deprecated. See per-host configuration documentation.
  • ParallelSSHClient.scp_send and scp_recv with directory target path will now copy source file to directory keeping existing name instead of failing when recurse is off - #183.
  • pssh.clients.ssh.SSHClient wait_finished timeout is now separate from SSHClient(timeout=<timeout>) session timeout.
  • ParallelSSHClient.join with timeout now has finished and unfinished commands as Timeout exception arguments for use by client code.

Fixes

  • ParallelSSHClient.copy_file with recurse enabled and absolute destination path would create empty directory in home directory of user - #197.
  • ParallelSSHClient.copy_file and scp_recv with recurse enabled would not create remote directories when copying empty local directories.
  • ParallelSSHClient.scp_send would require SFTP when recurse is off and remote destination path contains directory - #157.
  • ParallelSSHClient.scp_recv could block infinitely on large - 200-300MB or more - files.
  • SSHClient.wait_finished would not apply timeout value given.

1.12.1

Fixes

  • Reading from output streams with timeout via run_command(<..>, timeout=<timeout>) would raise timeout early when

trying to read from a stream with no data written to it while other streams have pending data - #180.

1.12.0

Changes

  • Added ssh-python (libssh) based native client with run_command implementation.
  • ParallelSSHClient.join with timeout no longer consumes output by default to allow reading of output after timeout.

Fixes

  • ParallelSSHClient.join with timeout would raise Timeout before value given when client was busy with other commands.

Note

ssh-python client at pssh.clients.ssh.ParallelSSHClient is available for testing. Please report any issues.

To use:

from pssh.clients.ssh import ParallelSSHClient

This release adds (yet another) client, this one based on ssh-python (libssh). Key features of this client are more supported authentication methods compared to ssh2-python.

Future releases will also enable certificate authentication for the ssh-python client.

Please migrate to one of the two native clients if have not already as paramiko is very quickly accumulating yet more bugs and the 2.0.0 release which removes it is imminent.

Users that require paramiko for any reason can pin their parallel-ssh versions to parallel-ssh<2.0.0.

1.11.2

Fixes

  • ParallelSSHClient going out of scope would cause new client sessions to fail if client.join was not called prior - #200

1.11.0

Changes

  • Moved polling to gevent.select.poll to increase performance and better handle high number of sockets - #189
  • HostOutput.exit_code is now a dynamic property returning either None when exit code not ready or the exit code as reported by channel. ParallelSSHClient.get_exit_codes is now a no-op and scheduled to be removed.
  • Native client exit codes are now more explicit and return None if no exit code is ready. Would previously return 0 by default.

Packaging

  • Removed OSX Python 3.6 and 3.7 wheels. OSX wheels for brew python, currently 3.8, on OSX 10.14 and 10.15 are provided.

Fixes

  • Native client would fail on opening sockets with large file descriptor values - #189

1.10.0

Changes

  • Added return_list optional argument to run_command to return list of HostOutput objects as output rather than dictionary - defaults to False. List output will become default starting from 2.0.0.
  • Updated native clients for new version of ssh2-python.
  • Manylinux 2010 wheels.

Fixes

  • Sockets would not be closed on client going out of scope - #175
  • Calling join() would reset encoding set on run_command - #159

1.9.1

Fixes

  • Native client SCP and SFTP uploads would not handle partial writes from waiting on socket correctly.
  • Native client copy_file SFTP upload would get stuck repeating same writes until killed when copying multi-MB files from Windows clients - #148
  • Native client scp_send would not correctly preserve file mask of local file on the remote.
  • Native client tunnel, used for proxy implementation, would not handle partial writes from waiting on socket correctly.

1.9.0

Changes

  • Removed libssh2 native library dependency in favour of bundled ssh2-python libssh2 library.
  • Changed native client forward agent default behaviour to off due to incompatibility with certain SSH server implementations.
  • Added keep-alive functionality to native client - defaults to 60 seconds. ParallelSSHClient(<..>, keepalive_seconds=<interval>) to configure interval. Set to 0 to disable.
  • Added ~/.ssh/id_ecdsa default identity location to native client.

1.8.2

Fixes

  • Native parallel client forward_ssh_agent flag would not be applied correctly.

1.8.1

Fixes

  • Native client socket timeout setting would be longer than expected - #133

Packaging

  • Added Windows 3.7 wheels

1.8.0

Changes

  • Native client no longer requires public key file for authentication.
  • Native clients raise pssh.exceptions.PKeyFileError on object initialisation if provided private key file paths cannot be found.
  • Native clients expand user directory (~/<path>) on provided private key paths.
  • Parallel clients raise TypeError when provided hosts is a string instead of list or other iterable.

1.7.0

Changes

  • Better tunneling implementation for native clients that supports multiple tunnels over single SSH connection for connecting multiple hosts through single proxy.
  • Added greenlet_timeout setting to native client run_command to pass on to getting greenlet result to allow for greenlets to timeout.
  • Native client raises specific exceptions on non-authentication errors connecting to host instead of generic SessionError.

Fixes

  • Native client tunneling would not work correctly - #123.
  • timeout setting was not applied to native client sockets.
  • Native client would have SessionError instead of Timeout exceptions on timeout errors connecting to hosts.

1.6.3

Changes

  • Re-generated C code with latest Cython release.

Fixes

  • ssh2-python >= 0.14.0 support.

1.6.2

Fixes

  • Native client proxy initialisation failures were not caught by stop_on_errors=False - #121.

1.6.1

Fixes

  • Host would always be 127.0.0.1 when using proxy_host on native client - #120.

1.6.0

Changes

  • Added scp_send and scp_recv functions to native clients for sending and receiving files via SCP respectively.
  • Refactoring - clients moved to their own sub-package - pssh.clients - with backwards compatibility for imports from pssh.pssh_client and pssh.pssh2_client.
  • Show underlying exception from native client library when raising parallel-ssh exceptions.
  • host parameter added to all exceptions raised by parallel clients - #116
  • Deprecation warning for client imports.
  • Deprecation warning for default client changing from paramiko to native client as of 2.0.0.
  • Upgrade embedded libssh2 in binary wheels to latest version plus enhancements.
  • Adds support for ECDSA host keys for native client.
  • Adds support for SHA-256 host key fingerprints for native client.
  • Added SSH agent forwarding to native client, defaults to on as per paramiko client - forward_ssh_agent keyword parameter.
  • Windows wheels switched to OpenSSL back end for native client.
  • Windows wheels include zlib and have compression enabled for native client.
  • Added OSX 10.13 wheel build.

Fixes

  • Windows native client could not connect to newer SSH servers - thanks Pavel.

Note - libssh2 changes apply to binary wheels only. For building from source, see documentation.

1.5.5

Fixes

  • Use of sudo in native client incorrectly required escaping of command.

1.5.4

Changes

  • Compatibility with ssh2-python >= 0.11.0.

1.5.2

Changes

  • Output generators automatically restarted on call to join so output can resume on any timeouts.

1.5.1

Fixes

  • Output pssh.exceptions.Timeout exception raising was not enabled.

1.5.0

Changes

  • ParallelSSH2Client.join with timeout now consumes output to ensure command completion status is accurate.
  • Output reading now raises pssh.exceptions.Timeout exception when timeout is requested and reached with command still running.

Fixes

  • ParallelSSH2Client.join would always raise Timeout when output has not been consumed even if command has finished - #104.

1.4.0

Changes

  • ParallelSSH2Client.join now raises pssh.exceptions.Timeout exception when timeout is requested and reached with command still running.

Fixes

  • ParallelSSH2Client.join timeout duration was incorrectly for per-host rather than total.
  • SFTP read flags were not fully portable.

1.3.2

Fixes

  • Binary wheels would have bad version info and require git for installation.

1.3.1

Changes

  • Added timeout optional parameter to join and run_command, for reading output, on native clients.

Fixes

  • From source builds when Cython is installed with recent versions of ssh2-python.

1.3.0

Changes

  • Native clients proxy implementation
  • Native clients connection and authentication retry mechanism

Proxy/tunnelling implementation is experimental - please report any issues.

1.2.1

Fixes

  • PyPy builds

1.2.0

Changes

  • New ssh2-python (libssh2) native library based clients
  • Added retry_delay keyword parameter to parallel clients
  • Added get_last_output function for retrieving output of last executed commands
  • Added cmds attribute to parallel clients for last executed commands

Fixes

  • Remote path for SFTP operations was created incorrectly on Windows - #88 - thanks @moscoquera
  • Parallel client key error when openssh config with a host name override was used - #93
  • Clean up after paramiko clients

1.1.1

Changes

  • Accept Paramiko version 2 but < 2.2 (it's buggy).

1.1.0

Changes

  • Allow passing on of additional keyword arguments to underlying SSH library via run_command - #85

1.0.0

Changes from 0.9x series API

  • ParallelSSHClient.join no longer consumes output buffers
  • Command output is now a dictionary of host name -> host output object with stdout and et al attributes. Host output supports dictionary-like item lookup for backwards compatibility. No code changes are needed to output use though documentation will from now on refer to the new attribute style output. Dictionary-like item access is deprecated and will be removed in future major release, like 2.x.
  • Made output encoding configurable via keyword argument on run_command and get_output
  • pssh.output.HostOutput class added to hold host output
  • Added copy_remote_file function for copying remote files to local ones in parallel
  • Deprecated since 0.70.0 ParallelSSHClient API endpoints removed
  • Removed setuptools >= 28.0.0 dependency for better compatibility with existing installations. Pip version dependency remains for Py 2.6 compatibility with gevent - documented on project's readme
  • Documented use_pty parameter of run_command
  • SSHClient read_output_buffer is now public function and has gained callback capability
  • If using the single SSHClient directly, read_output_buffer should now be used to read output buffers - this is not needed for ParallelSSHClient
  • run_command now uses named positional and keyword arguments